I keep getting this same error message when I tried to run vagrant up on my machine

$ vagrant up
Bringing machine 'homestead' up with 'virtualbox' provider...
==> homestead: Importing base box 'laravel/homestead'...
Progress: 90%
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.

Command: ["import", "/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox/box.ovf", "--vsys", "0", "--vmname", "ubuntu-18.04-amd64_1573673848596_76505", "--vsys", "0", "--unit", "11", "--disk", "/home/rnm/VirtualBox VMs/ubuntu-18.04-amd64_1573673848596_76505/ubuntu-18.04-amd64-disk001.vmdk"]

Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interpreting /home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox/box.ovf...
OK.
0%...
Progress state: NS_ERROR_INVALID_ARG
VBoxManage: error: Appliance import failed
VBoxManage: error: Code NS_ERROR_INVALID_ARG (0x80070057) - Invalid argument value (extended info not available)
VBoxManage: error: Context: "RTEXITCODE handleImportAppliance(HandlerArg*)" at line 957 of file VBoxManageAppliance.cpp

Arghh..this is quite anoyying.. I tried executing same command again and again but no luck. I check my disk space and there is plenty.

I have no choice, I will delete ~/.vagrant.d and execute vagrant command again

$ rm -rf ~/.vagrant.d
removed '/home/rnm/.vagrant.d/insecure_private_key'
removed '/home/rnm/.vagrant.d/rgloader/loader.rb'
removed directory '/home/rnm/.vagrant.d/rgloader'
removed directory '/home/rnm/.vagrant.d/tmp'
removed directory '/home/rnm/.vagrant.d/gems/2.4.9'
removed directory '/home/rnm/.vagrant.d/gems'
removed '/home/rnm/.vagrant.d/setup_version'
removed '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox/ubuntu-18.04-amd64-disk001.vmdk'
removed '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox/Vagrantfile'
removed '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox/box.ovf'
removed '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox/metadata.json'
removed directory '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1/virtualbox'
removed directory '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/8.2.1'
removed '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead/metadata_url'
removed directory '/home/rnm/.vagrant.d/boxes/laravel-VAGRANTSLASH-homestead'
removed directory '/home/rnm/.vagrant.d/boxes'
removed '/home/rnm/.vagrant.d/data/machine-index/index.lock'
removed directory '/home/rnm/.vagrant.d/data/machine-index'
removed '/home/rnm/.vagrant.d/data/lock.dotlock.lock'
removed '/home/rnm/.vagrant.d/data/checkpoint_signature'
removed '/home/rnm/.vagrant.d/data/checkpoint_cache'
removed '/home/rnm/.vagrant.d/data/lock.machine-action-13105a2995d25174a20c9b1d206a4f8a.lock'
removed directory '/home/rnm/.vagrant.d/data'
removed directory '/home/rnm/.vagrant.d'

and when I execute vagrant, re-downloading the box then suddenly it worked!

$ vagrant up
Bringing machine 'homestead' up with 'virtualbox' provider...
==> homestead: Box 'laravel/homestead' could not be found. Attempting to find and install...
    homestead: Box Provider: virtualbox
    homestead: Box Version: >= 8.2.0
==> homestead: Loading metadata for box 'laravel/homestead'
    homestead: URL: https://vagrantcloud.com/laravel/homestead
==> homestead: Adding box 'laravel/homestead' (v8.2.1) for provider: virtualbox
    homestead: Downloading: https://vagrantcloud.com/laravel/boxes/homestead/versions/8.2.1/providers/virtualbox.box
    homestead: Download redirected to host: vagrantcloud-files-production.s3.amazonaws.com
==> homestead: Successfully added box 'laravel/homestead' (v8.2.1) for 'virtualbox'!
==> homestead: Importing base box 'laravel/homestead'...
==> homestead: Matching MAC address for NAT networking...
==> homestead: Checking if box 'laravel/homestead' version '8.2.1' is up to date...
==> homestead: Setting the name of the VM: homestead
Vagrant is currently configured to create VirtualBox synced folders with
the `SharedFoldersEnableSymlinksCreate` option enabled. If the Vagrant
guest is not trusted, you may want to disable this option. For more
information on this option, please refer to the VirtualBox manual:

  https://www.virtualbox.org/manual/ch04.html#sharedfolders

This option can be disabled globally with an environment variable:

  VAGRANT_DISABLE_VBOXSYMLINKCREATE=1

or on a per folder basis within the Vagrantfile:

  config.vm.synced_folder '/host/path', '/guest/path', SharedFoldersEnableSymlinksCreate: false
==> homestead: Clearing any previously set network interfaces...
==> homestead: Preparing network interfaces based on configuration...
    homestead: Adapter 1: nat
    homestead: Adapter 2: hostonly
==> homestead: Forwarding ports...
    homestead: 80 (guest) => 8000 (host) (adapter 1)
    homestead: 443 (guest) => 44300 (host) (adapter 1)
    homestead: 3306 (guest) => 33060 (host) (adapter 1)
    homestead: 4040 (guest) => 4040 (host) (adapter 1)
    homestead: 5432 (guest) => 54320 (host) (adapter 1)
    homestead: 8025 (guest) => 8025 (host) (adapter 1)
    homestead: 9600 (guest) => 9600 (host) (adapter 1)
    homestead: 27017 (guest) => 27017 (host) (adapter 1)
    homestead: 22 (guest) => 2222 (host) (adapter 1)
==> homestead: Running 'pre-boot' VM customizations...
==> homestead: Booting VM...
==> homestead: Waiting for machine to boot. This may take a few minutes...
    homestead: SSH address: 127.0.0.1:2222
    homestead: SSH username: vagrant
    homestead: SSH auth method: private key
    homestead: Warning: Connection reset. Retrying...
    homestead: Warning: Remote connection disconnect. Retrying...
    homestead: Warning: Remote connection disconnect. Retrying...
    homestead: Warning: Remote connection disconnect. Retrying...
    homestead: Warning: Connection reset. Retrying...
    homestead: Warning: Remote connection disconnect. Retrying...
    homestead: 
    homestead: Vagrant insecure key detected. Vagrant will automatically replace
    homestead: this with a newly generated keypair for better security.
    homestead: 
    homestead: Inserting generated public key within guest...
    homestead: Removing insecure key from the guest if it's present...
    homestead: Key inserted! Disconnecting and reconnecting using new SSH key...
==> homestead: Machine booted and ready!
==> homestead: Checking for guest additions in VM...
==> homestead: Setting hostname...
==> homestead: Configuring and enabling network interfaces...
==> homestead: Mounting shared folders...
    homestead: /vagrant => /home/rnm/Homestead
    homestead: /home/vagrant/project1 => /home/rnm/workplace/laravel/project1
==> homestead: Running provisioner: file...
    homestead: /home/rnm/Homestead/aliases => /tmp/bash_aliases
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
    homestead: 
    homestead: ssh-rsa
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
    homestead: Ignoring feature: mariadb because it is set to false
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
    homestead: Ignoring feature: ohmyzsh because it is set to false
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
    homestead: Ignoring feature: webdriver because it is set to false
==> homestead: Running provisioner: shell...
    homestead: Running: /tmp/vagrant-shell20191114-1822-10idfmj.sh
==> homestead: Running provisioner: shell...
    homestead: Running: /tmp/vagrant-shell20191114-1822-1pewpva.sh
==> homestead: Running provisioner: shell...
    homestead: Running: script: Creating Certificate: project1.test
==> homestead: Running provisioner: shell...
    homestead: Running: script: Creating Site: project1.test
==> homestead: Running provisioner: shell...
    homestead: Running: inline script
==> homestead: Running provisioner: shell...
    homestead: Running: /tmp/vagrant-shell20191114-1822-yobfu3.sh
==> homestead: Running provisioner: shell...
    homestead: Running: script: Checking for old Schedule
==> homestead: Running provisioner: shell...
    homestead: Running: script: Clear Variables
==> homestead: Running provisioner: shell...
    homestead: Running: script: Restarting Cron
==> homestead: Running provisioner: shell...
    homestead: Running: script: Restarting Nginx
==> homestead: Running provisioner: shell...
    homestead: Running: script: Creating MySQL Database: project1
==> homestead: Running provisioner: shell...
    homestead: Running: script: Creating Postgres Database: project1
==> homestead: Running provisioner: shell...
    homestead: Running: script: Update Composer
    homestead: Updating to version 1.9.1 (stable channel).
    homestead:    
    homestead: Use composer self-update --rollback to return to version 1.9.0
==> homestead: Running provisioner: shell...
    homestead: Running: /tmp/vagrant-shell20191114-1822-o4c7za.sh
==> homestead: Running provisioner: shell...
    homestead: Running: script: Update motd
==> homestead: Running provisioner: shell...
    homestead: Running: /tmp/vagrant-shell20191114-1822-13ajt5r.sh

nice!

$ vagrant global-status
id       name      provider   state   directory                           
--------------------------------------------------------------------------
dd946c7  homestead virtualbox running /home/rnm/Homestead                 
 
The above shows information about all known Vagrant environments
on this machine. This data is cached and may not be completely
up-to-date (use "vagrant global-status --prune" to prune invalid
entries). To interact with any of the machines, you can go to that
directory and run Vagrant, or you can use the ID directly with
Vagrant commands from any directory. For example:
"vagrant destroy 1a2b3c4d"

$ vagrant ssh
Welcome to Ubuntu 18.04.3 LTS (GNU/Linux 4.15.0-64-generic x86_64)

Thanks for using 
 _                               _                 _ 
| |                             | |               | |
| |__   ___  _ __ ___   ___  ___| |_ ___  __ _  __| |
| '_ \ / _ \| '_ ` _ \ / _ \/ __| __/ _ \/ _` |/ _` |
| | | | (_) | | | | | |  __/\__ \ ||  __/ (_| | (_| |
|_| |_|\___/|_| |_| |_|\___||___/\__\___|\__,_|\__,_|

* Homestead v9.2.2 released
* Settler v8.2.0 released

0 packages can be updated.
0 updates are security updates.


vagrant@homestead:~$ 

Seems, my vagrant box was corrupted and re-download the box is the solution.